Civil & Environmental Engineering

Philip Udo-Inyang, Ph.D., P.E., Acting Chair

Bechara Abboud, Ph.D., P.E., Program Coordinator
Room 510, Engineering and Architecture Building
215-204-7816

www.temple.edu/engineering/academic-programs/cee/

The Civil Engineering Program is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org.

Civil Engineering Program

Goals, Objectives & Design Integration

The objective of the Civil Engineering program at Temple University is to provide students with a broad knowledge of mathematics, physical and engineering sciences, computer utilization, communication skills, and societal factors from which students can synthesize unique solutions to relatively complex problems related to Civil Engineering. Since Civil Engineering professionals plan, design, construct, and operate facilities which are essential to the quality of modern life, the Civil Engineering curriculum is based upon providing a fully-integrated design experience by beginning with introductory courses in the study of engineering history and economics, then progressing through a broad coverage of the primary areas of practice within Civil Engineering (surveying, structures, geotechnical engineering, construction engineering, water resources, transportation, and environmental engineering), and finishing with a year-long capstone Civil Engineering senior design project. The goal of the Civil Engineering program is to prepare students to pursue graduate education in their specific areas of interest, to pass the Fundamental of Engineering and Professional Engineer exams in the areas of practice within Civil Engineering, and become involved in design, project planning and research.

Civil Engineering Program with Concentration in Environmental Engineering

Goals, Objectives & Design Integration

The objective of the Concentration in Environmental Engineering within the Civil Engineering program at Temple University is to provide students with the skills needed to understand environmental problems and to design environmental systems to reduce and/or mitigate pollution. Environmental Engineering is a hybrid of Civil Engineering and Chemical Engineering, and it is thus natural for a civil engineer to broaden his/her knowledge in Environmental Engineering. Students in this concentration would be in a program that satisfies ABET accreditation for civil engineers, but they are more equipped to pass the Fundamental of Engineering and the Professional Engineer exams in the Environmental Engineering Category.

Summary of Requirements

University Requirements:

All new students starting in the 2011-2012 academic year and beyond are required to complete the university's General Education (GenEd) curriculum.

All Temple students must take a minimum of two writing-intensive courses as part of the major. The specific writing-intensive courses required for this major are listed below and are identified by "WI" in the Attribute column.

Department Requirements:

Civil Engineering Program

* Senior Design topic must be approved by the chair of the Department of Civil & Environmental Engineering.

Civil Engineering Program with Concentration in Environmental Engineering

* Senior Design topic must be approved by the chair of the Department of Civil & Environmental Engineering.

Minor in Environmental Engineering

Room 514, Engineering and Architecture Building

1947 North 12th Street

Philadelphia, PA 19122

215-204-7814

The Department of Civil and Environmental Engineering (CEE) offers a five-course (15 s.h.) undergraduate Minor in Environmental Engineering. Undergraduates from the Physical Sciences, Mathematics, and Engineering are eligible to participate in this program.

The purpose of the Minor is to allow students from a wide range of undergraduate majors to obtain an introductory background in sustainability, pollution prevention, environmental modeling, and pollution control technologies most appropriate to their interests and major field. The Minor in Environmental Engineering will add considerably to students' major program skills and make them more valuable to employers. Mathematics and Science majors will gain an understanding of engineering problem-solving processes and standard pollution control technologies. Engineering majors will understand the environmental effects of technologies in their major field and how to manage those effects. After the student completes the requirements for the minor, the minor will be recorded on the student's official university transcript upon graduation.

Academic Requirements for the Environmental Engineering Minor

Students pursuing an Environmental Engineering Minor must meet the following requirements:

• A minimum of C- in each course
• An overall GPA of 2.0 for courses in the Environmental Engineering minor

Courses

Two required courses:

• Civil Engineering 2711: Environmental Chemistry & Microbiology (prerequisites: CHEM 1031, CHEM 1033)
• Civil Engineering 3711: Environmental Engineering (prerequisites: Engineering 3553, Engineering 3571)

Three elective courses (minimum) may be taken after completion of the two required courses; choose from the following:

• Civil Engineering 4621: Engineering Hydrology
• Civil Engineering 4631: Environmental Hydrology
• Civil Engineering 4711: Air Pollution Control System
• Civil Engineering 4721: Water & Wastewater Systems Design
• Civil Engineering 4731: Solid & Hazardous Waste Management
• Civil Engineering 5622: Fate of Pollutants in Subsurface Environments
• Civil Engineering 5623: Near-Surface Environmental Systems
• Civil Engineering 5701: Physical Principles of Environmental Systems
• Civil Engineering 5702: Chemical Principles of Environmental Systems
• Civil Engineering 5703: Mathematical Modeling
• Civil Engineering 5771: Chemistry for Environmentally Sustainable Engineering
• Civil Engineering 5772: Sustainable Development & Industrial Ecology
• Civil Engineering 5792: Biological Principles of Environmental Systems

Students are required to complete prerequisite courses (shown in parentheses above) as indicated for the two required courses. These prerequisite courses do not count toward the minimum of 15 semester hours. The Department of Civil and Environmental Engineering maintains an approved list of elective courses.

Declaration of Environmental Engineering Minor

Students who are interested in pursuing an Environmental Engineering minor should speak to their advisor in the school or college in which they are pursuing their degree. Students should formally declare the Environmental Engineering minor upon completing no more than 6 credits toward the minor. There is no penalty if the minor is not completed. For more information and to declare the minor, please contact the Department of Civil and Environmental Engineering.

Suggested Semester By Semester Plans

Bachelor of Science in Civil Engineering (B.S.C.E.) 2011-2012

Requirements for New Students starting in the 2011-2012 Academic Year

Approved Civil Engineering Technical Electives:

Year 4/Fall:

Civil Engineering 4211: Bridge Engineering

Civil Engineering 4221: Intelligent Transportation Systems

Civil Engineering 4244: Introduction to Geosynthetics

Civil Engineering 4302: Engineering Project Management

Civil Engineering 4433: Behavior & Design of Masonry Structures

Civil Engineering 4445: Earthquake Engineering & Seismic Design

Civil Engineering 4711: Air Pollution Control System

Engineering 3096: Engineering Economic

Year 4/Spring:

Civil Engineering 3334: Structural Design of Pavements

Civil Engineering 4301: Construction Administration

Civil Engineering 4321: Geotechnical Engineering

Civil Engineering 4421: Structural Dynamics

Civil Engineering 4431: Behavior & Design of Steel Structures

Civil Engineering 4432: Behavior & Design of Reinforced Concrete Structures

Civil Engineering 4531: Life Cycle Assessment & Carbon Footprints

Civil Engineering 4621: Engineering Hydrology

Civil Engineering 4631: Environmental Hydrology

Civil Engineering 4721: Water & Wastewater Systems Design

Bachelor of Science in Civil Engineering (B.S.C.E.) - Environmental Engineering Concentration

Requirements for New Students starting in the 2011-2012 Academic Year

Approved Civil Engineering Technical Electives:

Fall:

Civil Engineering 3211: Transportation Engineering

Civil Engineering 3411: Structural Analysis

Civil Engineering 3412: Structural Analysis Laboratory

Civil Engineering 4221: Intelligent Transportation Systems

Civil Engineering 4244: Introduction to Geosynthetics

Civil Engineering 4302: Engineering Project Management

Civil Engineering 4711: Air Pollution Control System

Civil Engineering 4731: Solid & Hazardous Waste Management

Spring:

Civil Engineering 3611: Hydraulic Engineering (An Advanced Course)

Civil Engineering 4301: Construction Administration

Civil Engineering 4321: Geotechnical Engineering

Civil Engineering 4531: Life Cycle Assessment and Carbon Footprints

Civil Engineering 4621: Engineering Hydrology

Civil Engineering 4631: Environmental Hydrology

Civil Engineering 4641: Urban Streams & Storm Water Management

Civil Engineering 4721: Water & Wastewater Systems Design

Cooperative Education Programs

A Cooperative Education (Co-op) is an optional program available at the College of Engineering where you have the opportunity to gain professional work experience before graduation. It is designed to give you the chance to apply the knowledge learned in the classroom to real life problems. You will be exposed to the latest technology and new ideas at a worksite helping you understand your field of work more extensively. During the Co-op, you will make valuable connections with professionals in your field. A cooperative education can enhance and strengthen you academically, professionally and personally.

Below are the five-year curricula for the Co-op programs leading to the Bachelor of Science in Civil Engineering and the Bachelor of Science in Civil Engineering with a concentration in Environmental Engineering. The minimum requirement for graduation is 127 semester hours.

Bachelor of Science in Civil Engineering with Cooperative Experience

Requirements for New Students starting in the 2011-2012 Academic Year

Approved Civil Engineering Technical Electives:

Fall:

Civil Engineering 4211: Bridge Engineering

Civil Engineering 4221: Intelligent Transportation Systems

Civil Engineering 4244: Introduction to Geosynthetics

Civil Engineering 4302: Engineering Project Management

Civil Engineering 4433: Behavior & Design of Masonry Structures

Civil Engineering 4445: Earthquake Engineering & Seismic Design

Civil Engineering 4711: Air Pollution Control System

Engineering 3096: Engineering Economic

Spring:

Civil Engineering 3334: Structural Design of Pavements

Civil Engineering 4301: Construction Administration

Civil Engineering 4321: Geotechnical Engineering

Civil Engineering 4421: Structural Dynamics

Civil Engineering 4431: Behavior & Design of Steel Structures

Civil Engineering 4432: Behavior & Design of Reinforced Concrete Structures

Civil Engineering 4531: Life Cycle Assessment & Carbon Footprints

Civil Engineering 4621: Engineering Hydrology

Civil Engineering 4631: Environmental Hydrology

Civil Engineering 4721: Water & Wastewater Systems Design

Bachelor of Science in Civil Engineering- Environmental Engineering Concentration with Cooperative Experience

Requirements for New Students starting in the 2011-2012 Academic Year

Approved Civil Engineering Technical Electives:

Fall:

Civil Engineering 3211: Transportation Engineering

Civil Engineering 3411: Structural Analysis

Civil Engineering 3412: Structural Analysis Laboratory

Civil Engineering 4221: Intelligent Transportation Systems

Civil Engineering 4244: Introduction to Geosynthetics

Civil Engineering 4302: Engineering Project Management

Civil Engineering 4711: Air Pollution Control System

Civil Engineering 4731: Solid & Hazardous Waste Management

Spring:

Civil Engineering 3611: Hydraulic Engineering (An Advanced Course)

Civil Engineering 4301: Construction Administration

Civil Engineering 4321: Geotechnical Engineering

Civil Engineering 4531: Life Cycle Assessment and Carbon Footprints

Civil Engineering 4621: Engineering Hydrology

Civil Engineering 4631: Environmental Hydrology

Civil Engineering 4641: Urban Streams & Storm Water Management

Civil Engineering 4721: Water & Wastewater Systems Design