Journal Papers

1. Darvish, K. (2009) “Comparison between the Dynamic Moduli of Fully Non-Linear and Quasilinear Viscoelastic Materials”, International Journal of Non-Linear Mechanics, In Press.
2. Darvish, K., Shafieian, M., Romanov, V., Rotella, V., Salvatore Jr., M.D., Blebea, J., (2009) “Development of an In vitro Porcine Aorta Model to Study the Stability of Stent Grafts in Motor Vehicle Accidents”, J. Biomech. Eng., In Press.
3. Untaroiu, C., Darvish, K., Crandall, J., Deng, B., and Wang, J. T. (2005) “A Finite Element Model of the Lower Limb for Simulating Pedestrian Impacts”, SAE 2005-22-0008, Stapp Car Crash Journal, Vol. 49, pp. 157-181.
4. Kent, R., Lee, S. H., Darvish, K., Wang, S., Poster, C. S., Lange, A. W., Brede, C., Matsuoka, F. (2005) “Structural and Material Changes in the Aging Thorax and Their Role in Crash Protection for Older Occupants”, SAE 2005-22-0011, Stapp Car Crash Journal, Vol. 49, pp. 231-249.
5. Kohandel, M., Sivaloganathan, S., Tenti, G. and Darvish, K. (2005) “Frequency Dependence of Complex Moduli of Brain Tissue Using a Fractional Zener Model”, Physics in Medicine and Biology, Vol. 50, pp. 2799-2805.

Conference Papers

1. Darvish, K., Shafieian, M., Laksari, K., Barabadi, B., Parenti, C., (2008) “Experimental and Computational Analysis of Brain Deformations in Linear Head Impact”, Proceeding of ASME International Mechanical Engineering Congress and Exposition, Boston, MA
2. Shin, J., Lee, S. H., Kerrigan, J., Darvish, K., Crandall, J., Akiyama, A., Takahashi, Y., Okamoto, M., and Kikuchi, Y. (2006) “Development and Validation of a Finite Element Model for the Polar-II Upper Body”, Accepted for the 2006 SAE International Congress, Detroit, MI.
3. Sahraei-Esfahani, E., Darvish, K., Parnianpour, M., and Bateni, A. (2005) “Reducing Occupant Injury in Frontal Crashes for a Low-Floor City Bus”, Accepted for the  Proceedings of IMECE2005 Transportation and Environment Division, 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL.
4. Untaroiu, C., Darvish, K., Crandall, J., Deng, B,, and Wang, J. T. (2005) “Characterization of the Lower Limb Soft Tissues in Pedestrian Finite Element Models”, ESV Conference Preceedings, Paper Number 05-0250, Washington DC.
5. Lee, S. H., and Darvish, K. (2005) “Modeling of Material Properties and Fluid-Structure Interaction for Traumatic Rupture of the Aorta”, ESV Conference Proceedings, Paper Number 05-0396, Washington DC.

 Conference Abstracts

1. Shafieian, M., Darvish, K. (2008) “An In Vitro and Finite Element Model for Traumatic Injury in Porcine Thoracic Aorta”, Northeast Biomedical Engineering Society Conference, Providence, RI
2. Shafieian, M., Laksari, K., Darvish, K. (2008) “Simulation of Brain Kinematics in Linear Head Impact”, Northeast Biomedical Engineering Society Conference, Providence, RI
3. Clements, D., Clements D.IV, Darvish, K., Shafieian, M., Betz, R., (2008)“The Effect on Pedicle Screw Pullout Strength of Optimizing Pedicle Fill Using a Tool to Size and Dilate the Pedicle”, 23rd North American Spine Society, Toronto, ON
4. Shafieian, M., Darvish, K. (2007) “Viscoelastic Properties of Injured and Uninjured Rat Brain Tissue”, ASME Summer Bioengineering Conference, Keystone, CO
5. Darvish, K., Shafieian, M., Romanov, V., Rotella, V., Salvatore, M., Blebea, J., (2007) “Development of Experimental and Computational Models to Evaluate the Stability of Aortic Stent Grafts In Motor Vehicle Accidents”, ASME Summer Bioengineering Conference, Keystone, CO
6. Shafieian, M., Darvish, K. (2007) “Effect of TBI on Material Properties of Rat Brain Tissue”, Northeast Biomedical Engineering Society Conference, Stoney Brook, NY
7. Shafieian, M., Darvish, K. Crandall, J., Stone, J., Okonkwo, D. (2006) “In Vivo and In Situ Material Properties of Brain Tissue”, ASME Summer Bioengineering Conference, Amelia Island, FL
8. Rehman, S., Darvish, K., Shafieian, M., Matullo, K., DeLong, W. G., (2006) “Performance Analysis and Morphology of Unused versus Reprocessed Drill Bits”, Orthopaedic Trauma Association Conference, Phoenix, AZ