Temple University Computer and Information Services

Students

Faculty

Staff

Temple Wireless

Connecting to
tusecurewireless or turesnet

Windows 7 - Quick Connect Steps

Note: Refer to the Windows 7 full setup procedure if either of the following is true:

you use your computer in an office and see "TEMPLE" or "TU" before your AcessNet username when you log in, or
you are unable to connect using the steps below.


Registering Connecting Disconnecting

Registering If you are planning to use the turesnet or turesnetextra network, you must register your computer before you can connect. You do not need to register your computer if you are using the tusecurewireless network. Register now

Connecting The following steps explain how to connect for the first time. After the initial connection is established, you will connect automatically when you are in range of the network. Notes: Before performing the steps below, verify that your laptop displays an active wireless connection. If the green connection light does not appear, activate the connection by pressing the appropriate switch or key on your laptop. For detailed instructions, refer to the user guide for your computer.

1. Click the wireless icon on the system tray (lower right portion of the screen next to the date and time).

2. Click the tusecurewireless or turesnet network connection.

3. Click the check box next to Connect Automatically. Then click Connect.

4. If prompted, enter your AccessNet username and password and then click OK.

5. At the Windows Security Alert window, click Connect.

Disconnecting

1. Click the wireless icon on the system tray (lower right portion of the screen next to the date and time).

2. Click the tusecurewireless or turesnet connection.

3. Click Disconnect.