Computer Services Logo
Temple Wireless
CS Home
  About Temple Wireless
  Wireless News
  Requirements
  Locations
  Printing
  FAQs
  Policies
    

Connecting to
tusecurewireless or turesnet

Windows Vista - Full setup procedure



Registering

If you are planning to use the turesnet or turesnetextra network, you must register your computer before you can connect.

You do not need to register your computer if you are using the tusecurewireless network.

Register now


Connecting

Note: Before setting uptusecurewireless or turesnet, verify that your laptop displays an active wireless connection. If the green connection light does not appear, activate the connection by pressing the appropriate switch or key on your laptop. For detailed instructions, refer to the user guide for your computer.


1. Click Start > Control Panel.

desktop

2. Double-click Network and Sharing Center.

3. Click Manage Wireless Networks. manage wireless networks

4. Click Add.

add

5. Click Manually create a network profile.

manually create

6. Enter the following information:

a. Network name: tusecurewireless or turesnet

b. Security type:
WPA2-Enterprise

c. Encryption type:
AES

d. Select Start this connection automatically

e. Select Connect even if the network is not broadcasting

Then, click Next.

information

7. Click Change connection settings. change connection settings

8. Select the Security tab and uncheck "Cache user information..."

 

cache

9. Click Settings. settings

10. Make the following changes:

a. Uncheck "Validate server certificate."

b. Select Secured password (EAP-MSCHAP v2).

c. Click Configure.

eap properties

11. Uncheck "Automatically use my Windows..." and click OK. Then, click OK on any open windows.

peap properties

12. Go to the Task Bar at the bottom of the Desktop. Mouse over the connecting icon and click on Additional information is required to connect to tusecurewirelessor turesnet.

connecting icon

13. Enter your AccessNet username and password and then click OK.

credentials

14. A message verifying authentication may display. authentication

Disconnecting  

1. Right-click the connecting icon at the bottom of the Desktop. connecting icon  

2. Click Network and Sharing Center. network and sharing  

3. Then, under tusecurewireless or turesnet, click Disconnect. disconnect  

Reconnecting  

1. Right-click the Disconnect icon at the bottom of the Desktop. disconnect icon  

2. Click Connect to a network. connect  

3. Select tusecurewireless or turesnet > Connect.

 

connect

 

4. Click Enter/select additional log on information. additional information  

5. Enter your AccessNet username and password and then click OK.

credentials  

6. At the "Successfully connected to tusecurewireless or turesnet" window, click Close. successful
  


© Copyright Temple University Computer and Information Services. All Rights Reserved.
For web related questions, please send e-mail to cs@temple.edu.