Connecting to tusecurewireless or turesnet - Mac OS (pre-Lion)

Connecting to tusecurewireless or turesnet Mac OS (pre-Lion) - Full Setup Procedure • Registering • Connecting Registering (For TUresnet users only) If you are planning to use the turesnet or turesnetextra network, you must register your computer before you can connect. You do not need to register your computer if you are using the tusecurewireless network. Register now

Connecting (For all users)
1. Click Apple > System Preferences.

2. Click Network.

3. Click Airport > Advanced.

4. Under Preferred Networks, click the + sign.

5. Enter the following information: a. Network Name: tusecurewireless or turesnet b. Security: WPA2 Enterprise c. Your AccessNet username and password d. 802.1X: Automatic Then select "Remember this network" and click Add.

6. At the Network screen, do the following: a. Select 802.1X (tab) > WPA: tusecurewireless or WPA: turesnet. Note: If "WPA: tusecurewireless" or "WPA: turesnet" does not display, click the + sign at the bottom of the box and create a profile. You may be prompted to enter your laptop password. b. Verify that your AccessNet username and password display. c. For Authentication, select PEAP. d. Click OK.

7. At the Network screen, change the Network Name to tusecurewireless or turesnet and click Apply. The connection will initiate.

8. Log in with your Accessnet username and password and then click OK.

9. "AirPort Connected" and "Status: Authenticated" display to confirm the connection.

Wireless Home

Help Improve Temple Computer Services	x
Did you find this information helpful? (required) Yes No
Your Name (required) Your E-mail (required)
Tell us more. Remember to answer required fields. Send

Thanks	x
We appreciate your feedback. You're helping to make Temple Computer Services better. Close