Temple University switchboard: 215-204-7000
Temple University Home Page
Undergraduate Bulletin Main Page
Tyler Main Page
02626 (Graphic Art and Design) 0003-004. Three Dimension (3 s.h.) FS
A foundation course panel with PDS 0003 introducing ideas fundamental to three-dimensional work and thought. Only simple materials such as paper, cardboard, wire, plaster, wood, and clay are used.
0102. Fiber Structures (3 s.h.)
An introduction to textiles through hand-manipulated processes such as netting, knotting, twining, wrapping, and plaiting. The course examines how color and pattern develop through interlocking structures and studies two and three dimensional forms in fiber. The course also introduces loom weaving techniques.
0103. Fiber Structures II (3 s.h.)
An introduction to tapestry frame weaving and an examination of how color and pattern affect the woven structure. Hand manipulated techniques including netting and twining will be used, as well as three-dimensional structures using hand manipulated techniques. An introduction to feltmaking and four harness floor looms.
0104. Papermaking (3 s.h.)
This course introduces students to papermaking techniques, including sheet forming and casting.
0130. Fabric Pattern and Image I (3 s.h.)
An investigation of the unique properties of color application through dyes and pigments on fabric. Discharge, resist, and patterning techniques are covered, with an emphasis on color relationships and imagery.
0131. Fabric Pattern and Image II (3 s.h.)
An introduction to textile printing using silk screen, dyes, and pigments. Photographic and cut paper stencils are emphasized with projects in repeat and non-repeat designs. An introduction to contemporary use of surface patterning in three-dimensional and wearable forms.
0151-0152. Beginning Ceramics (3 s.h.)
Wheel thrown and hand formed pottery and sculpture. An introduction to mold-making, glazing, and firing, with emphasis on design as an organic outgrowth of the ceramic process.
0153-0154. Jewelry (3 s.h.)
An introduction to the design and fabrication of small-scale metal objects and jewelry, exploring metal-smithing, casting, machine use, and finishing techniques.
0158. Introduction to Glass (3 s.h.)
An introduction to all of the basic processes of glass forming, including blowing, casting, and oven work. Focus on the development of the blown form and a working knowledge of the specialized tools and equipment used in hot glass. Prerequisite for all other courses.
0160. Intermediate Ceramics (3 s.h.)
Creative problems in pottery for the student who has mastered use of the wheel and basic ceramic processes.
0205. Fabric Coloring and Embellishment (3 s.h.)
0206. Fabric Constructions (3 s.h.)
Shaped and embellished textiles, emphasizing relief as well as three-dimensional forms using fabric. Stitchery, armatures, piecing, and fabric dyeing are covered. Projects involve sculpture, wearable, and patterned fabric structures.
0207. Plastics for Jewelry (3 s.h.)
An introduction to the forming, fabricating, and casting of plastic materials. The student works with acrylics, polyesters, urethanes, epoxies, and silicones, and learns to combine these materials with metal.
0208. Electroforming Workshop (3 s.h.)
Prerequisite: One year of metalworking experience. Students with prior metalworking experience have the opportunity to explore nontraditional electrochemical processes for the creation of unique forms in metal.
0209. Color in Metals (3 s.h.)
Aspects of applying color to metals or changing the existing color of metallic surfaces. Students are introduced to the new techniques, color anodizing aluminum, and the space-age metals, titanium, and Columbium. Application of color resin, and vitrous enamels are also examined.
0210. Blacksmithing (3 s.h.)
An introduction to hot forging. Both ferrous and non-ferrous metal used in an investigation of function and sculptural form.
0213. Machine Tool Processes (3 s.h.)
The lathe, milling machine, shaper, drill press, and other machines are examined for their creative potential.
0215. Production Processes (3 s.h.)
W220. Art Workshop in Scotland (6 s.h.) SS
A five-week summer studio art workshop on location in Scotland. After an introductory week in London visiting museums, contemporary art galleries, and art schools, students spend the next four weeks working in studio facilities in Scotland at the Glasgow School of Art. Artists from that institution and Tyler School of Art staff conduct a series of intensive workshops in a variety of media. The students' travel and research experiences while in Great Britain are utilized as sources of inspiration for the development of their artwork.
0233. CAD/CAM I (3 s.h.)
Computer-aided design/computer-aided manufacture. The computer is employed to design in 3-D using Cadkey software.The designs are then passed to our SmartCAM software which creates programs for the DM4400 4-axis numerical controlled milling machine. Students also are assisted in creating photo-realistic presentation renderings from their Cadkey drawings using Pixar RenderMan software.
0237-0238. Glass Construction (3 s.h.)
Object-making using hot and cold glass. The course consists of slides, demonstrations, and studio time spent on casting, slumping, fusing, sandblasting, and painting on glass. The course focuses on glass as a material and its use in mixed media construction.
0241-0242. Hot Glass (3 s.h.)
An introduction to the processes of glass forming and decoration, together with the study of glass chemistry, toolmaking, furnace and oven design, and construction.
0243-0244. Advanced Glass (3 s.h.) FS
Problems in glass for the advanced student with emphasis on individual research projects.
0245. Glass Workshop (3 s.h.) FS
An intensive daily workshop in hot and cold glass processes. The course includes lectures, demonstrations, and field trips related to glass. Traditions as well as experimental exploration of glass encouraged.
0247. Glass Seminar (3 s.h.)
This course is designed to examine issues which are relative to the advanced glass student. Technical lectures and assignments are part of the focus. Practical information is shared and discussed, and a survey of contemporary glass forms and concepts is also explored. While this ongoing seminar evolves, the students are individually pursuing their own work as related in their statement of intent.
0248. Ceramic Mold Making (3 s.h.)
Students building both two- and three-piece plaster molds to be used in the slipcasting process for the production of multiple items made from clay. The course examines both the historical and contemporary use of molds and slipcasting. During the semester, the students are encouraged to incorporate the use of slipcasting into their existing style of work.
0249. Primitive Ceramics (3 s.h.)
A course concentrating on the use of primitive ceramics. Structured to develop skills in locating and refining clay, forming processes, and a variety of low temperature firing processes, the course utilizes the pottery techniques of Native American ceramics as one of the sources for investigation.
0251. Two-Dimensional Ceramics (3 s.h.)
The making and production as it applies to interior and exterior architecture. Several processes, techniques, and firing methods are explored. These include both high and low firing, and mold and hand pressing techniques. The history of tiles is surveyed, with concentration on relevant periods and countries.
0253-0254. Ceramics Material (3 s.h.)
An examination of ceramics process, the formulation of clay bodies and glazes, common firing practices, and the construction of kilns. The course is intended for the ceramics major.
0255-0256. Ceramics (3 s.h.)
Problems in ceramics for the advanced student with emphasis on individual research projects.
0257. Plastics (3 s.h.)
An introduction to the forming, fabricating, and casting of plastic materials. Students work with acrylics, polyesters, urethanes, epoxies, and silicones.
0258. Porcelain (3 s.h.)
0259. Metalsmithing (3 s.h.)
Advanced metal forming techniques are explored. Students are encouraged to produce functional hollowware and objects of a non-traditional source.
0. Casting (3 s.h.)
Controlled inertial (centrifugal) casting, rubber mold making, wax injection, product casting, high frequency melting, sand casting, and other specialized casting processes are used to produce jewelry and other objects in precious and non-precious metal.
0261. Advanced Throwing and Wheel Work (3 s.h.)
A course concentrating on the use of the potter's wheel, using a problem-solving approach. Structured to develop the skill levels necessary to make personal aesthetic choices with regard to three dimensional ceramic forms with this machine.
0262. Ceramic Structures (3 s.h.)
Ceramics as a sculptural media. The history of ceramic sculpture as well as contemporary movements are stressed. Various techniques used in ceramic sculpture and techniques of materials used in conjunction with ceramics are covered.
0263. Enameling (3 s.h.)
All basic enameling techniques which include Plique A Jour, Limoges, Champeleve, Bustail, etc. The course explores the use of synthetic resins as an addition to the enamelist's repertoire.
0265-0266. Advanced Metalsmithing (3 s.h.)
Fabrication of hollow structures, three-dimensional sheet development, processes of surface embellishment, and non-ferrous forgings.
0267-0268. Metals Workshop (2 s.h.)
Summer classes for two credits in specialized subjects: tool making, stamping, fashion jewelry, wedding band design, photo portfolio, pewter workshop, forging, mechanisms, assaying, and refining.
0271. Ceramic Workshop (3 s.h.)
Offered on Saturdays to Tyler students who have successfully completed their beginning ceramic requirement and who plan to major in other areas, and to community residents by special permission of the instructor. A variety of skill levels and aesthetic points of view can interact in alternate semesters, the emphasis of specialization is on salt firing, then on wood firing processes and techniques and the production of ceramic objects.
0273-0274. Advanced Fiber (3 s.h.)
Design and imagery through loom-constructed textiles: tapestry, double weave, brocade, and ikat. The course examines painting and dye techniques on fibers, surveys historical woven textiles, and discusses contemporary forms and concepts in fiber art.
0275-0276. Senior Fibers (3 s.h.)
Fourth-year concentration in weaving textile design.
0280. Photo Images on Fabrics (3 s.h.)
Creating imagery and design on fabrics through the use of photographic stencils. Emphasis is placed on the many facets of photo-silkscreen. Alternative methods of fabric painting are discussed. Previous knowledge of basic photography is recommended.
0286. Contemporary Basketry (3 s.h.)
0289. Photo Processes and Etching Jewelry
All aspects of the photographic processes which can be used with metals and plastics will be introduced. This includes photo resist techniques for metal etching, plating, and anodizing, along with photo embedments in plastics.
0291. Lapidary and Stone Setting (3 s.h.)
Further advanced lapidary processes are demonstrated which include the cutting and polishing of faceted stones designed by the student. Traditional and innovative stone setting methods are also to be explored in this course.
0292. Metals - Concepts and Criticism (3 s.h.)
0293-0294. Advanced Ceramics (3 s.h.)
Problems in ceramics for the advanced student with emphasis on individual research projects.
0295. Machine Tool Processes (3 s.h.)
Prerequisite: 0113 Machine Tool Process. A continuation of machine tool processes, this course is designed to enable students to gain greater proficiency in the use of machine tools.
0300-0301. Student Mobility Program (12-17 s.h.) FS
An exchange program enabling juniors to spend one semester at any of nine participating East Coast Art schools without losing status as an official Tyler student. Work, grades, and full degree-granting are given by the host institution.
0351-0352. Senior Ceramics (3 s.h.)
Fourth-year concentration in ceramics and thesis work.
0361. Advanced Lapidary and Stone Setting (3 s.h.)
0363-0364. Senior Metals and Plastics (3 s.h.)
After exploring the use of plastics, the student is introduced to portfolio preparation. An independent senior project is also encouraged.
0371-0372. Senior Seminar in Metals (3 s.h.)
This course provides seniors who are interested in going on to graduate school with an opportunity to experience responsibilities and rewards of graduate education by participation in the graduate metals seminar. These students, selected by the faculty, are also provided with a work space in the graduate metals studio.
0382. Advanced Fabric Printing (3 s.h.)
Further exploration of imagery and processes in surface design. Advanced photographic and non-repeating printing techniques using pigments and dyes. Sculptural and environmental applications of printed textiles also are studied. Projects focus on individual development of subject matter within the context of contemporary and historic fiber art.
W387. Business Practices in Crafts (3 s.h.)
All aspects of business practices as they relate to the craftsmen will be covered. The course will include the pricing of work, taxes, contracts, bookkeeping for small businesses, marketing, artist-gallery relations, and studio operations. The student will become familiar with the computer's use in a business environment.
Return to the list of courses.
Comments and questions concerning this web version of the bulletin or requests for adding reference marks for linking to subsections of a page may be sent to Mary England.